® Wheel cover 4pcs/set color box pack

¡@

¡@
¡@
Autopure Traditional Wire Ring Installation

¡@

Installation:

Please note the installation in our web page yellow pictures
    http://www.autopure.com.tw/tradi.htm

    Fit the steel ring into the plastic clips aligning the
    kink for the tire valve with that in the wheel cover

    Adjusting steel ring with push/bend the welding points,
    press the wheel cover on to the wheel against to the tire valve
    first then applying pressure gently around the edge

    For a better installation: recommend to use a long flat
    screwdriver or tool to press in the out coming retention legs

    Warning! Don't just squeeze hubcap into wheel, it will cause an
    incorrect installation, will bend and break retention legs
Re-installation
     Re-install Autopure Capads1 on the steel wheel:

     Please recover bended wire ring back to it's original proper circle
     before you re-install Autopure, Capads1 (once it was taken out
     from wheel, you have to recover wire ring proper circle,
     for anew put on wheel.)

¡@

¡@

 EurolinE® Wheel Cover   Traditional Wheel Cover Spinner wheel cover

Steel Wheel-Replica  WireWheelCover Spinner Wheel Billet Adapter

Home     Inquiry     e-Mail Us

MEXA CO., LTD.  (Since 1979)
The Best ABS Engineering Plastic Wheel Cover's Manufacturer in Taiwan
P. O. Box: 30-534, Taipei 100, Taiwan, R. O. C.
Tel. +886-2-23657700 Fax.+886-2-23657702

Office: 3F., No. 128 Ku Ling Street, Taipei 100, Taiwan, R.O.C.

Factory :No. 66 Kung Ming 2nd Road, Tsun Tou Liau Industry Area, Tainan, Taiwan Tel.09-1019-6666

www.autopure.com

¡@

Car Accessories

   

© This page is copyrighted by Mexa Co., Ltd. since Jan. 1996