AKAGE water sea dragon gel fire extinguisher Mechanical foam "gel
type" fire extinguisher in stainless steel bottle.
Mechanical foam with Fire Department type approval number:
FE-A113002 and AE-A112004
High molecular gel is added to the fire extinguishing agent.
Spray the gel fire extinguisher evenly on the solid combustible
material
to immediately Forming a thicker gel film, it can isolate
the air,
cool the surface of the object,
It consumes a lot of heat and achieves good fire-blocking and
fire-extinguishing effects.
It can effectively extinguish Class A
fires in forests and grasslands.
The carbon dioxide and water vapor produced after the high water
content gel
is burned are non-combustible and non-toxic.
Use
AKAGE to extinguish fire,
which is efficient, environmentally friendly and
water-saving in terms of fire extinguishing function;
A fire truck equipped with
AKAGE fire extinguisher,
It is equivalent to 10 fire trucks equipped with tap water.
The principles and methods of fire fighting tactics are basically
the
same as those of water fire fighting.
When using AKAGE to extinguish Class A
fires, its fire extinguishing effect is
more than 6 times that of water.
When extinguishing forest and grassland fires, its fire
extinguishing effect is
more than 10 times that of water.
The most important thing is that the fire extinguishing agent of
"AKAGE Fire Extinguisher AE-A112004" is
"Pure water" makes "non-conductive",
which is actually suitable for solar panel fire extinguishers and
lithium battery fire extinguishers
The basic requirements.
The "Water Halon Mechanical Foam Fire
Extinguishing Agent AE-A112004"
which has been approved by the Fire
Department Adding AKAGE allows
this fire
extinguisher to lock in a large amount of moisture,
increasing the
fire extinguishing effect by 6 times.
At the same time, it can also quickly cool down the burning object,
that is, on the surface of the solar panel fire object Forms a
gelatinous
covering layer to
isolate the air and inhibit the diffusion of toxic gases.
To achieve the purpose of controlling the spread of fire and
extinguishing fire quickly and effectively.
The AKAGE remaining after use is
environmentally friendly and can be
naturally decomposed into water
and carbon dioxide.
Water Halon
fire extinguisher: Non-human factors, three-year warranty.
It is advisable to check the pressure gauge pointer from time to
time or
every three months to see if it is pointing to the middle
green area.
If
it is lower than the green zone (＜10.5kgf/cm²),
it should be sent
to the maintenance department of
AKA Halon
Tainan Factory.
Perform routine inspections on the bottle, pressure gauge, spray
hose, gasket,
O-ring, and handle valve. And replenish fire
extinguishing agent and driving gas.
Each
AKAGE
fire extinguisher has a unique laser engraved product number.
"Unique ID Number" The production date, production conditions, fire
extinguishing
agent filling amount, storage pressure, Output time,
total weight, etc.
The manufacturing date is marked on the bottom of the bottle, such
as
250309-8, which means March 9, 2025 The 8th produced.
When shipped, 250309-8 will also be noted on the warranty
information,
which is valid for three years. |
